Trials and tribulations of a London biker, from newbie to seasoned commuter and global adventurer

Mandatory statement of the obvious: Clicking a link to eBay or other affiliations may earn me a commission if a purchase is made.
I will use this money to buy more motorbike stuff, petrol and beer. But mostly beer. Cheers!

How to Replace a Clutch Lever (Honda CBF 500)

Post author By Arthur
Post date January 15, 2018
2 Comments on How to Replace a Clutch Lever (Honda CBF 500)

We’ve all a dropped a bike or few, so easily done when new,
Your joy laying on it’s side, gone is all your pride,
Clutch lever broken in the fall, repeatedly you now stall,
Such a cheap repair, why did you not pack a spare?

A snapped lever is so common after an embarrassing drop of your bike. But fear not, replacing a clutch lever is a such a simply and quick job, that anyone can do it. No need to pay for garage labour, let me show you how to replace it in 5 mins with just a spanner and screwdriver. This is on a Honda CBF500, but many other bikes will be near identical.

It’s also a good plan to order a couple of replacements (these non-genuine levers were only £6.50 from M&P), so you can stow one under your seat in case you find yourself inconveniently stuck.

Note: this guide is for traditional cable clutches and not a hydraulic clutch.