Mandatory statement of the obvious: Clicking a link to eBay or other affiliations may earn me a commission if a purchase is made.
I will use this money to buy more motorbike stuff, petrol and beer. But mostly beer. Cheers!

Categories
Hardware Maintenance

Fitting a Honda CBF500 Givi Rack

When it comes to hard luggage and top boxes, the name Givi is synonymous, with this leading Italian brand make some of the most popular luggage on the market. As a London commuter hard luggage is incredible useful for carrying stuff; the essential security chain, work clothes to change into, packed lunch, laptop, books etc. A top box will carry the lot with ease, whilst keeping it all dry and secure. In the event of a spill, you really don’t want to carrying all that stuff on your person.

Second hand Givi rack gets Hammerite treament
Second hand Givi rack gets Hammerite treament

However, Givi gear doesn’t come cheap. So for Mary’s CBF500 I set about sourcing stuff second hand. I managed to pick up a set of Givi 260FZ rack arms on ebay for £20. Note the same arms fit the CBF 500, 600 & 1000, so extend your ebay search accordingly. They needed a lick of Hammerite to tart them up, and although they came with the required spacers, were missing some bolts and washers. However these are all standard M8 size, and I happened to have some spare from old crash damaged racks off my Fazer. Normally these arms sell for ~£60 (Buy from SportsBikeShop). Instructions with a details of all parts required can be found on Givi website.

Next up I needed an ‘M5’ plate to attach to the rack. Note this is the Monokey variant that is sturdier and can carry more weight and bigger boxes, as opposed to the less robust M5M Monolock plate. On ebay these plates were thin on the ground, often no cheaper than new and/or missing fitment bolts. As such I opted to purchasing from SportsBikeShop the M5 Givi plate who had them discounted at £35 delivered.

Fitting was a breeze and just entailed removing four bolts from rear of the CBF500 and replacing them with the longer Givi bolts.

Fitted Givi rack
Fitted Givi rack

Lastly, I just had to source a top box. Brand new, these aren’t cheap with the heavy duty Monokey boxes starting at around £170. Back to ebay it was. With a stroke of luck I found a seller listing three boxes with very poor titles and descriptions, completely omitting the name Givi! They needed collecting and were located around an hour drive away, but nonetheless I stuck a low bid in and blagged all three for £50! Two old E36 boxes and a larger Maxia 52ltr box. A little shabby, but undamaged and including keys. Sorted!

A gaggle of Givi boxes
A gaggle of Givi boxes

The smaller E36 boxes had been used as side panniers, but all use the same interchangeable Monokey fitting, so we can switch between a smaller or large top box depending on what we’re carrying.

So there you have it, with a little hunting around and patience you don’t need to spend a fortune to add hard luggage to your bike.

Share with your buddies!

By Arthur

Seasoned London commuter, doing my best to stay rubber side down and never stop moving forward.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.